รหัสสินค้า | SKU-02504 |
หมวดหมู่ | Proximity Sensor - ตรวจจับวัตถุโลหะ - พร็อกซิมิตี้เซนเซอร์ |
ราคา | 0.00 บาท |
ลงสินค้า | 14 ก.ค. 2564 |
อัพเดทล่าสุด | 30 พ.ย. 2564 |
คงเหลือ | 0 ชิ้น |
Cylinder type sensing head size | M30 |
---|---|
Type | Shielded |
Sensing method | Inductive type |
Sensing distance | 10 mm -10% to +10% |
Setting distance | 0 to 8 mm |
Differential distance | 10% Max. of sensing distance |
Sensing object | Ferrous metal (Sensitivity lowers with non-ferrous metals.) |
Standard sensing object | Iron 30*30*1mm |
Response frequency | 400 Hz (average) |
Power supply voltage | 12 to 24 VDC (ripple(p-p) :10% Max.) |
Operating voltage range | 10 to 55 VDC |
Current consumption | 13 mA Max. |
Control output (Output type) | PNP open collector output |
Control output (Switching capacity) | 0 to 200 mA (55VDC Max.) |
Control output (Residual voltage) | 2 V Max. (under load current with cable length of 2m) |
Indicator | Operation indicator(red) |
Operation mode | NO |
Protective circuit | Surge suppressor Output short-cut protection Power supply reverse polarity protection |
Standard or Different frequency | Standard |
Ambient temperature | Operating: -40 to 85 CEL Storage: -40 to 85 CEL (with no icing or condensation) |
Ambient humidity | Operating: 35 to 95 %RH Storage: 35 to 95 %RH (with no condensation) |
Temperature influence | +-10% Max. of sensing distance in temperature range of -25 to +70CEL +-15% Max. of sensing distance in temperature range of -40 to +85CEL (As the basis for sensing distance of 23CEL) |
Voltage influence | +-1% Max. of sensing distance in rated voltage range +-15%. (As the basis for sensing distance at standard power voltage) |
Insulation resistance | 50 M OHM Min. at 500VDC between charged parts and the case |
Dielectric strength | 1000 VAC 50/60 Hz for 1 minute between charged parts and the case |
Vibration resistance | 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions |
Shock resistance | 1000m/s2 for 10 times each in X, Y, and Z directions |
Degree of protection | IEC60529: IP67 |
Applicable standard (EC Directive (Low Voltage Directive)) | EN60947-1 EN60947-5-2 |
Applicable standard (EC Directive (EMC Directive)) | EMI: EN60947-5-2 Emission Enclosure: CISPR11 Group 1 class A EMS: EN60947-5-2 Immunity ESD: IEC61000-4-2 Immunity RF-interference: IEC61000-4-3 Immunity Burst: IEC61000-4-4 CE marking: Equipped |
Applicable standard (CCC mark) | Not equipped |
Connection method | M12 connector models |
Material (case) | Brass nickel plating |
Material (sensing surface) | PBT |
Material (clamping nuts) | Brass nickel plating |
Material (toothed washer) | Iron zinc plating |
Accessories | Instruction manual |
นโยบายการรับเปลี่ยน
1.ร้านยินดีรับเปลี่ยนสินค้า ภายใน 7 วันทำการนับตั้งแต่ลูกค้าเซ็นต์รับสินค้านั้นแล้วหากเกินจากวันเวลาดังกล่าวแล้ว บริษัทฯ ขอสงวนสิทธิ์ในการไม่รับเปลี่ยน/คืนสินค้า
2.ลูกค้าสามารถขอเปลี่ยน/คืนสินค้าโดยลูกค้าจะต้องทำการจัดส่งสินค้ากลับมายังบริษัทฯโดยที่สินค้าที่ลูกค้าต้องการเปลี่ยน/คืนจะต้องอยู่ในสภาพสมบูรณ์ ไม่ชำรุดเสียหายจากการใช้งาน
สภาพสินค้าต้องไม่เกิดการเปลี่ยนแปลงใดๆ รวมถึงป้ายราคา ป้ายยี่ห้อสินค้า เอกสารคู่มือต่างๆยังคงอยู่ และบรรจุ ในหีบห่อบรรจุภัณฑ์ของสินค้านั้นๆ ในสภาพเดียวกันกับสภาพที่บริษัทฯ นำส่งต่อลูกค้าพร้อมแสดงหลักฐานในการสั่งซื้อสินค้า
ซึ่งลูกค้าสามารถเปลี่ยน/คืนสินค้าตามกรณีดังต่อไปนี้
2.1 จัดส่งสินค้าผิดรุ่น ผิดสี หรือผิดขนาด ให้กับลูกค้า อ้างอิงตามหลักฐานใบสั่งซื้อ
2.2 จัดส่งสินค้าที่มีลักษณะแตกต่าง หรือไม่มีส่วนคล้ายคลึงกับรูปภาพของสินค้าที่ได้แสดงไว้ในหน้ารายละเอียดสินค้า
2.3 จัดส่งสินค้าที่มีสภาพชำรุด เสียหาย หรือไม่สามารถใช้งานได้ตั้งแต่ได้รับสินค้า ให้กับลูกค้า ทางร้านจะแจ้งสภาพให้ก่อนตกลงสั่งซื้อ
นี่คือกล่อง "เขียนข้อความ" กล่องที่จะให้คุณเพิ่มข้อความ รูปภาพและวิดีโอได้อย่างอิสระตามสไตล์ของคุณเอง เช่น แบนเนอร์ โปรโมชั่น บทความ แนะนำร้านค้า หรือ รายการสินค้าเด่น เป็นต้น โดยคุณสามารถแก้ไขหรือลบกล่องนี้ได้หากคุณต้องการ ซึ่งมีวิธีการตามขั้นตอนดังต่อไปนี้
วิธีการแก้ไขข้อความในกล่องหน้าที่เข้าชม | 940,888 ครั้ง |
ผู้ชมทั้งหมด | 620,557 ครั้ง |
เปิดร้าน | 17 ม.ค. 2559 |
ร้านค้าอัพเดท | 5 ก.ย. 2568 |