
| รหัสสินค้า | SKU-01263 |
| หมวดหมู่ | Counter / Timer |
| ราคา | 0.00 บาท |
| ลงสินค้า | 23 ม.ค. 2561 |
| อัพเดทล่าสุด | 30 ก.ย. 2563 |
| คงเหลือ | 0 ชิ้น |
| Function | 1 Stage Preset Counter / Total Preset Counter |
|---|---|
| Preset stages | 1stages |
| Rated supply voltage | 24 VAC 50/60 Hz 12 to24 VDC (20% max.) |
| Operating voltage range | 85% to 110% of rated supply voltage (90% to 110% at 12 to 24 VDC) |
| Power consumption | Approx. 7.2 VA Approx. 4.7 W |
| Counter (Count range) | -99999~999999 |
| Counter (Max. counting speed) | 30 Hz/5 kHz (switching) (Minimum counting input signal width: 16.7 ms (ON/OFF ratio: 1:1)/0.1 ms (ON/OFF ratio: 1:1)) Common setting for CP1 and CP2 |
| Counter (Input mode) | Increment decrement or increment/decrement (UP/DOWN A (command input), UP/DOWN B (individual input) and UP/DOWN C(quadrature input)) |
| Counter (Output modes) | N / F / C / R / K-1 / P / Q / A / K-2 / D / L |
| Counter One-shot time) | 0.01 to 99.99 s variable |
| Counter (Reset system) | External, manual and automatic reset (internal according to C, R, P and Q mode operation) |
| Input signal | CP1 / CP2 / Reset / Total reset |
| Input method | No-voltage/Voltage input (selectable) |
| No-voltage input (No-contact input) | Short-circuit (ON) impedance: 1 kΩ Leakage current (0 Ω): 12 mA Residual voltage: 3 V max. Open circuit impedance: 100 kΩ Maximum voltage: 30 V |
| No-voltage input (Contact input) | Use a contact which can adequately switch 5 mA at 10 V. |
| Voltage input | Hight level: 4.5 to 30 VDC Low level: 0 to 2 VDC Input resistance: 4.7 kΩ |
| Applicable two-wire sensor | leakage current: 1.5 mA Switching capacity: 5 mA Residual voltage: 3 V Operating voltage: 10 VDC |
| Minimum input signal width | External reset: 1 ms/20 ms (selectable) |
| Standby time | 290 ms |
| Control output (Contact output) | SPDT Switching capacity: 3 A at 250 VAC/30 VDC, resistive load (cos phi=1) Minimum applicable load: 10 mA at 5 VDC (failure level:P reference value) |
| Display method | 7-segment negative transmissive LCD |
| Digits | 6digits |
| Character height | Count value: 10 mm (Red) Zero suppression: Provided Set value: 6 mm (Green) |
| Prescaling function | Provided (0.001 to 99.999) |
| Decimal point adjustment | Rightmost 3 digits |
| Key protection | Key protect Switch |
| Teaching function | Not provided |
| Batch counting function | Not provided |
| Communications | Not provided |
| Memory backup | EEP-ROM (Number of rewite: 100,000 operations min.Service life: 10 years min.) |
| Surrounding air temperature | Operating: -10 to 55 ℃ Storage: -25 to 70 ℃ |
| Ambient humidity | Operating: 25 to 85% Storage: 25 to 85% |
| Insulation resistance | 100 MΩ min. (at 500 VDC) Between current carrying terminals and exposed non-current carrying metal parts / Between non-continuous contacts |
| Dielectric withstand voltage | Between current carrying metal parts and non-current carrying metal parts:2000 VAC 50/60 Hz for 1 min Between power terminals and control input terminals:1000 VAC 50/60 Hz for 1 min Between control output, and power supply/input circuit:2000 VAC 50/60 Hz for 1 min Between non-continuous contacts:1000 VAC 50/60 Hz for 1 min |
| Impulse withstand voltage | Between power terminals:1.0 kV Between current carrying terminals and exposed non-current carrying metal parts:1.5 kV |
| Noise immunity | Between power terminals:±480 V Between input terminals:±600 V Square-wave noise by noise simulator (Pulse width: 100 ns/1 µs, 1-ns rise) |
| Static immunity | Mulfunction: 8 kV, Destruction: 15 kV |
| Vibration resistance (Destruction) | 10 to 55 Hz, 0.75-mm single amplitude each in 3 directions for 2 h |
| Vibration resistance (Malfunction) | 10 to 55 Hz, 0.35 mm single amplitude each in 3 directions for 10 min |
| Shock resistance (Destruction) | 300 m/s**2, 3 times each in 6 directions (3 axes) |
| Shock resistance (Malfunction) | 100 m/s**2, 3 times in each directions (3 axes) |
| Mechanical life expectancy | 10,000,000 operations min. |
| Electrical life expectancy | 100,000 operations min. (3 A at 250 VAC, resistive load) |
| Degree of protection | Case front: IEC IP66, UL508 Type 4X (indoors) (when using the Y92S-29 Waterproof Packing) |
| Mounting method | Flush mounting/Surface mounting |
| External connection method | 11-pinSocket |
| Case color | Black (Munsell N1.5) |
| Weight | Approx. 130 g |


นโยบายการรับเปลี่ยน
1.ร้านยินดีรับเปลี่ยนสินค้า ภายใน 7 วันทำการนับตั้งแต่ลูกค้าเซ็นต์รับสินค้านั้นแล้วหากเกินจากวันเวลาดังกล่าวแล้ว บริษัทฯ ขอสงวนสิทธิ์ในการไม่รับเปลี่ยน/คืนสินค้า
2.ลูกค้าสามารถขอเปลี่ยน/คืนสินค้าโดยลูกค้าจะต้องทำการจัดส่งสินค้ากลับมายังบริษัทฯโดยที่สินค้าที่ลูกค้าต้องการเปลี่ยน/คืนจะต้องอยู่ในสภาพสมบูรณ์ ไม่ชำรุดเสียหายจากการใช้งาน
สภาพสินค้าต้องไม่เกิดการเปลี่ยนแปลงใดๆ รวมถึงป้ายราคา ป้ายยี่ห้อสินค้า เอกสารคู่มือต่างๆยังคงอยู่ และบรรจุ ในหีบห่อบรรจุภัณฑ์ของสินค้านั้นๆ ในสภาพเดียวกันกับสภาพที่บริษัทฯ นำส่งต่อลูกค้าพร้อมแสดงหลักฐานในการสั่งซื้อสินค้า
ซึ่งลูกค้าสามารถเปลี่ยน/คืนสินค้าตามกรณีดังต่อไปนี้
2.1 จัดส่งสินค้าผิดรุ่น ผิดสี หรือผิดขนาด ให้กับลูกค้า อ้างอิงตามหลักฐานใบสั่งซื้อ
2.2 จัดส่งสินค้าที่มีลักษณะแตกต่าง หรือไม่มีส่วนคล้ายคลึงกับรูปภาพของสินค้าที่ได้แสดงไว้ในหน้ารายละเอียดสินค้า
2.3 จัดส่งสินค้าที่มีสภาพชำรุด เสียหาย หรือไม่สามารถใช้งานได้ตั้งแต่ได้รับสินค้า ให้กับลูกค้า ทางร้านจะแจ้งสภาพให้ก่อนตกลงสั่งซื้อ

นี่คือกล่อง "เขียนข้อความ" กล่องที่จะให้คุณเพิ่มข้อความ รูปภาพและวิดีโอได้อย่างอิสระตามสไตล์ของคุณเอง เช่น แบนเนอร์ โปรโมชั่น บทความ แนะนำร้านค้า หรือ รายการสินค้าเด่น เป็นต้น โดยคุณสามารถแก้ไขหรือลบกล่องนี้ได้หากคุณต้องการ ซึ่งมีวิธีการตามขั้นตอนดังต่อไปนี้
วิธีการแก้ไขข้อความในกล่อง
เข้าสู่โหมดตกแต่งร้าน > คลิกเลือกที่กล่องนี้ > เลือกเมนูข้อความ

| หน้าที่เข้าชม | 957,039 ครั้ง |
| ผู้ชมทั้งหมด | 636,708 ครั้ง |
| เปิดร้าน | 17 ม.ค. 2559 |
| ร้านค้าอัพเดท | 9 ธ.ค. 2568 |
สยามออโตเมชั่น