Digital Timer ยี่ห้อ Omron
รุ่น H5CZ H5CZ-L8
(New)
Item Feature
- Number of Digits
- 4-digit
- Release Voltage
- 10% of the supply voltage
- Minimum Signal Input Time (sec)
- 1m/20m (collectively switching)
- Power Supply Voltage (V)
- AC100 to 240
- Weight (g)
- About 105 (body only)
- Power Consumption
- About 6.2VA
- Character Height (mm)
- (LCD) timing value: 10 setting: 6
- Noise Immunity
- Between power terminals: +/- 1.5kV between input terminals: square wave noise by +/- 600V noise simulator (pulse width 100ns/1micros, rising 1ns)
- Storage Temperature (DegreeC)
- -25 - +70 deg C (icing or no condensation)
- Sensor Waiting Time
- (During sensor waiting time and no input is accepted control output OFF) 250ms or less
- Display Mode
- Adding (UP) display and subtraction (DOWN) display (switching)
- Mounting Method
- Flush mounting, surface mounting (shared)
- Caution
- This product is manufactured in Japanese standards. Please check the specification before you order.
- Insulation Resistance (Mohm)
- (Non-current-carrying metal parts between the exposed conductive portion terminal, non-continuous contacts between) 100 or more (by DC500V mega)
- Withstand Voltage
- Power and AC2000V 50/60Hz 1min control output, input circuit between: input circuit between the AC2000V 50/60Hz 1min power: non-current-carrying metal parts between the current-carrying metal parts AC2000V 50/60Hz 1min non- Continuous contact between: AC1000V 50/60Hz 1min
- Power Reset
- (Except A-3, b-1, F, the ton-1, toff-1 mode) 0.5s: minimum power-supply cut-off time
- Operating Time Variation
- (In the case of start signal) 0.005% +/- 0.03s or less (at power supply start) +/- 0.01% +/- 0.05s or less (and are based on the set value) +/-
- Impulse Voltage(V)
- Non-current-carrying metal parts between the exposed and 3.0k conductive part terminal:: 4.5k between power supply terminals
- Voltage Influence
- (In the case of start signal) 0.005% +/- 0.03s or less (at power supply start) +/- 0.01% +/- 0.05s or less (and are based on the set value) +/-
- Vibration Resistance
- 10 - 55Hz single amplitude 0.75mm 3 directions of the 2h
- Power Failure Memory
- More than 10 years: retention of data (100 000 times or more the number of rewriting times) EEP-ROM
- Ambient Humidity
- 25 to 85%
- Electrostatic Yield Strength
- 8kV (malfunction), 15kV (destruction)
- One shot time
- 0.01 to 99.99s
- Color
- Front panel: Light gray (5Y7 / 1)
- Input Signal
- Signal, reset
- Terminal Structure
- Socket type (8-pin)
- Set Error
- (In the case of start signal) 0.005% +/- 0.03s or less (at power supply start) +/- 0.01% +/- 0.05s or less (and are based on the set value) +/-
- Operating Mode
- A: Signal ON delay (I) A-1: Signal ON delay (II) A-2: Power ON Delay (I) A-3: Power ON-delay (II) b: flicker (I) b-1: flicker (II) d: Signal OFF-delay E: interval F: cumulative Z: ON / OFF duty vari
- Time Base Range
- 9.999s (0.001s -), 99.99s (0.01s -), 999.9s (0.1s -), 9999s (1s -), 99min59s (1s -), 999.9min (0.1min -), 9999min (1min -), 99h59min (1min -), 999.9h (0.1h -), 9999h (1h -)
- Control Output
- (P level, reference value) DC5V 10mA: (cosphi = 1) minimum applicable load AC250/DC30V 5A resistive load
- Allowable Voltage Range
- 85-110% of rated supply voltage
- Effect of Temperature
- (In the case of start signal) 0.005% +/- 0.03s or less (at power supply start) +/- 0.01% +/- 0.05s or less (and are based on the set value) +/-
- Protection Structure
- IP66, UL508 Type 4X IEC standard (indoor), but only the panel surface (waterproof packing type Y92S-29 is used)
- Reset Method
- Power reset (by the output mode), external reset, manual reset, automatic reset (by the output mode)
- Operating Ambient Temperature (deg C)
- -10 - +55 deg C (when mounted side by side: -10 - +50 deg C) (icing or no condensation)
- Lifespan
- (AC250V 5A resistive load, 1800 times / h, ambient temperature conditions more than 100,000 times: electrical and mechanical:: (23 deg C 1800 times / h time no load, a switching frequency, ambient temperature conditions) 10 million times or more : 23 deg C)
- Output Type
- Contact output (time limit 1c)
- Input Method
- 100kohm impedance: when opened 3V following: short-circuit residual voltage (about 12mA current flow when 0ohm) 1kohm following: No-voltage input impedance short-circuit
- Vibration Resistance (malfunction)
- 10 - 55Hz single amplitude 0.35mm 3 directions of the 10min
- Impact Resistance (Malfunction)
- 3 times each in 100m / s 2 3 axis each direction
- Impact Resistance
- 3 times each in 300m / s 2 3 axis each direction
ช่องทางการรับ-ส่งสินค้าและค่าธรรมเนียมการจัดส่ง
1. ซื้อสินค้าโดยตรงผ่านหน้าร้าน 169/90 ถนน นิมิตใหม่ มีนบุรี
2. จัดส่งทางมอร์เตอไซต์ เฉพาะในส่วนของกรุงเทพและปริมลฑล Lalamove Grab KERRY
3. จัดส่งทางไปรษณีย์ ทั้งในรูปแบบการส่งพัสดุธรรมดา และ EMS
4. จัดส่งทางเครื่องบิน ตามสายการบินที่ท่านต้องการ
อาทิ นกแอร์,การบินไทย ค่าจัดส่งตามน้ำหนักของสินค้า
5. รถทัวร์ รถตู้ (คิดค่าจัดส่งตามเที่ยวรถและตามน้ำหนักของสินค้า)
www.siamhitech.net
www.siam-outomation.com
ขอบคุณลูกค้าทุกท่านที่ไว้วางใจ
เวลาเปิดเวลา 8.30 - 17.30 น.
หยุดวันอาทิตย์และวันจันทร์นะคะ ขอบคุณมากคะ
02-9147284 086-3447034