Timer OMRON รุ่น H3CR-A (1.2s-300h, 100-240VAC, 100-125VDC)

Timer OMRON รุ่น H3CR-A (1.2s-300h, 100-240VAC, 100-125VDC)
รหัสสินค้า SKU-02515
หมวดหมู่ Counter / Timer
ราคา 1,000.00 บาท
สถานะสินค้า พร้อมส่ง
ลงสินค้า 4 ส.ค. 2564
อัพเดทล่าสุด 7 มิ.ย. 2565
คงเหลือ 15 ชิ้น
จำนวน
ชิ้น
หยิบลงตะกร้า
บัตรประชาชน
บุ๊คแบ๊งค์
คุ้มครองโดย LnwPay
Timer ยี่ห้อ Omron
รุ่น H3CR-A

(New)


General

 

Item H3CR-A/-AS/-A-301 H3CR-AP H3CR-A8/-A8S/-A8-301 H3CR-A8E
Operating mode A: ON-delay
B: Flicker OFF start
B2: Flicker ON start
C: Signal ON/OFF-delay
D: Signal OFF-delay
E: Interval
G: Signal ON/OFF-delay
J: One-shot
A: ON-delay (power supply start)
B: Flicker OFF start (power supply start)
B2: Flicker ON start (power supply start)
E: Interval (power supply start)
J: One-shot (power supply start)
Pin type 11-pin 8-pin
Input type No-voltage input Voltage input ---
Time-limit output type H3CR-A/-A8/-AP/-A-301/-A8-301: Relay output (DPDT)
H3CR-AS/-A8S: Transistor output (NPN/PNP universal) *1
Relay output
(SPDT)
Instantaneous output type --- Relay output
(SPDT)
Mounting method DIN track mounting, surface mounting, and flush mounting
Approved standards UL508, CSA C22.2 No.14, NK, Lloyds, CCC: GB/T 14048.5 *2
Conforms to EN61812-1 and IEC60664-1 (VDE0110) 4kV/2.
Output category according to EN60947-5-1 for Timers with Contact Outputs.
Output category according to EN60947-5-2 for Timers with Transistor Outputs.

 

 

*1 The internal circuits are optically isolated from the output. This enables universal application as NPN or PNP transistor.
     For details, refer to your OMRON website.
*2 CCC certification requirements

 

 

Recommended fuse Contact Output: 0216005 (250 VAC, 5 A), manufactured by Littelfuse
Transistor Output: 0216.100 (250 VAC, 100 mA) manufactured by Littelfuse
Rated operating voltage Ue
Rated operating current Ie
Contact Output:
AC-15: Ue: 250 VAC, Ie: 3 A
AC-13: Ue: 250 VAC, Ie: 5 A
DC-13: Ue: 30 VDC, Ie: 0.5 A
Transistor Output:
DC-13: Ue: 30 VDC, Ie: 0.1 A
Rated insulation voltage 250 V
Rated impulse withstand voltage
(altitude: 2,000 m max.)
4 kV (at 240 VAC)
Conditional short-circuit current 1000 A

 

Time Ranges

 

Note: When the time setting knob is turned below "0" until the point where the time setting knob stops, the output will
          operate instantaneously at all time range settings.
          For details, refer to your OMRON website.

 

Standard (0.05-s to 300-h) Models

 

Time unit s (sec) ×10 s (10 sec) min (min) ×10 min (10 min) h (hrs) ×10 h (10 hrs)
Full scale
setting
1.2 0.05 to 1.2 1.2 to 12 0.12 to 1.2 1.2 to 12 0.12 to 1.2 1.2 to 12
3 0.3 to 3 3 to 30 0.3 to 3 3 to 30 0.3 to 3 3 to 30
12 1.2 to 12 12 to 120 1.2 to 12 12 to 120 1.2 to 12 12 to 120
30 3 to 30 30 to 300 3 to 30 30 to 300 3 to 30 30 to 300

 

Ratings

 

Rated supply voltage
*1 *2 *5
100 to 240 VAC (50/60 Hz)/100 to 125 VDC, 24 to 48 VAC (50/60 Hz)/12 to
48 VDC (24 to 48 VAC/VDC for H3CR-A8E) *3
Operating voltage range 85% to 110% of rated voltage (90% to 110% at 12 to 48 VDC)
Power reset Minimum power-opening time: 0.1 s
Input *6 No-voltage Input
ON impedance: 1 kΩ max.
ON residual voltage: 1 V max.
OFF impedance: 100 kΩ min.
Voltage Input
Max. permissible capacitance between inputs lines (terminals 6 and 7): 1,200 pF
Load connectable in parallel with inputs (terminals 6 and 7).
100 to 240 VAC/100 to 125 VDC
High (logic) level: 85 to 264 VAC/85 to 137.5 VDC
Low (logic) level: 0 to 10 VAC/0 to 10 VDC
24 to 48 VAC/12 to 48 VDC
High (logic) level: 20.4 to 52.8 VAC/10.8 to 52.8 VDC
Low (logic) level: 0 to 2.4 VAC/0 to 1.2 VDC
Power consumption H3CR-A/-A8
100 to 240 VAC/100 to 125 VDC (When at 240 VAC, 60 Hz)
Relay ON: approx. 2.0 VA (1.6 W), Relay OFF: approx. 1.3 VA (1.1 W)
24 to 48 VAC/12 to 48 VDC (When at 24 VDC)
Relay ON: approx. 0.8 W, Relay OFF: approx. 0.2 W
H3CR-AP *3
100 to 240 VAC/100 to 125 VDC (When at 240 VAC, 60 Hz)
Relay ON: approx. 2.5 VA (2.2 W) *4, Relay OFF: approx. 1.8 VA (1.7 W) *4
24 to 48 VAC/12 to 48 VDC (When at 24 VDC)
Relay ON: approx. 0.9 W *4, Relay OFF: approx. 0.3 W *4
H3CR-A8E
100 to 240 VAC/100 to 125 VDC (When at 240 VAC, 60 Hz)
Relay ON/OFF: approx. 2 VA (0.9 W)
24 to 48 VAC/VDC (When at 24 VDC)
Relay ON/OFF: approx. 0.9 W
H3CR-AS/-A8S
24 to 48 VAC/12 to 48 VDC (When at 24 VDC)
Output ON: 0.3 W, Output OFF: 0.2 W
Control outputs Models with Contact Outputs
H3CR-A/-A8/-AP
5A at 250 VAC/30 VDC, 0.15A at 125 VDC, resistive load (cosφ = 1)
Minimum applied load: 10mA at 5 VDC (failure level: P reference value)
Contact materials: Ag-alloy
H3CR-A8E
5A at 250 VAC/30 VDC, 0.15A at 125 VDC, resistive load (cosφ = 1)
Minimum applied load: 10mA at 5 VDC (failure level: P reference value)
Contact materials: AgSnIn
Transistor output: Open collector(NPN/PNP)
H3CR-AS/-A8S
100 mA max at 30 VDC max., residual voltage: 2 VDC max.

 

 

*1. DC ripple rate: 20% max. (A single-phase, full-wave-rectification power supply can be used).
*2. Do not use an inverter output as the power supply. Refer to your OMRON website for details.
*3. Models with 24-to-48-VAC or 12-to-48-VDC power supply have inrush current. Caution is thus required when turning
       ON and OFF power to the Timer with a non-contact output from a device such as a sensor. (Models with an inrush
       current of approximately 50 mA and a 24-VDC power supply are available (the H3CR-A-302 and H3CR-A8-302).)
       For details, consult your OMRON sales representative.
*4. The values are for when the terminals 2 and 7 and terminals 10 and 6 are short-circuited, and include the
       consumption current of the input circuit.
*5. Refer to your OMRON website when using the Timer together with a 2-wire AC proximity sensor.
*6. For details, see Input Connections: No-voltage Input Signal Levels on Catalog, and Input Connections: Voltage Input
       Signal Levels on Catalog.

 

Characteristics

 

Accuracy of operating
time
±0.2% FS max. (±0.2%±10 ms max. in a range of 1.2 s or 3 s)
Setting error ±5% FS ±50 ms *1
Reset time Min. power-opening time: 0.1 s max.
Min. pulse width: 0.05 s (H3CR-A/-AS)
Reset voltage 10% max. of rated supply voltage
Influence of voltage *2 ±0.2% FS max. (±0.2%±10 ms max. in a range of 1.2 s or 3 s)
Influence of temperature ±1% FS max. (±1%±10 ms max. in a range of 1.2 s or 3 s)
Insulation resistance 100 MΩ min. (at 500 VDC)
Dielectric strength 2,000 VAC (1,000 VAC for H3CR-A[]S), 50/60 Hz for 1 min (between current-carrying
metal parts and exposed non-current-carrying metal parts)
2,000 VAC (1,000 VAC for H3CR-A[]S), 50/60 Hz for 1 min (between control output
terminals and operating circuit)
2,000 VAC, 50/60 Hz for 1 min (between contacts of different polarities)
1,000 VAC, 50/60 Hz for 1 min (between contacts not located next to each other)
2,000 VAC, 50/60 Hz for 1 min (between input and control output terminals and
operation circuit) for H3CR-AP
Impulse withstand
voltage
5 kV (between power terminals) for 100 to 240 VAC/100 to 125 VDC, 1 kV for 24 to 48
VAC/12 to 48 VDC
5 kV (between current-carrying terminal and exposed non-current-carrying metal
parts) for 100 to 240 VAC/100 to 125 VDC, 1.5 kV for 24 to 48 VAC/12 to 48 VDC and
24 to 48 VAC/VDC
Noise immunity ±1.5 kV (between power terminals) and ±600 V (between no-voltage input terminals),
square-wave noise by noise simulator (pulse width: 100 ns/1 μs, 1-ns rise)
Static immunity Malfunction: 8 kV
Destruction: 15 kV
Vibration resistance Destruction: 10 to 55 Hz with 0.75-mm single amplitude each in 3 directions for 2 hours
each
Malfunction: 10 to 55 Hz with 0.5-mm single amplitude each in 3 directions for 10
minutes each
Shock resistance Destruction: 1,000 m/s2 3 times each in 6 directions
Malfunction: 100 m/s2 3 times each in 6 directions
Ambient temperature Operating: -10°C to 55°C (with no icing)
Storage: -25°C to 65°C (with no icing)
Ambient humidity Operating: 35% to 85%
Life expectancy *4 Mechanical: 20,000,000 operations min. (under no load at 1,800 operations/h)
Electrical: 100,000 operations min. (5 A at 250 VAC, resistive load at 1,800
operations/h) *3
EMC (EMI) EN61812-1
Emission Enclosure: EN55011 Group 1 class A
Emission AC Mains: EN55011 Group 1 class A
(EMS) EN61812-1
Immunity ESD: IEC61000-4-2
Immunity RF-interference: IEC61000-4-3
Immunity Burst: IEC61000-4-4
Immunity Surge: IEC61000-4-5
Immunity Conducted Disturbance: IEC61000-4-6
Immunity Voltage Dip/Interruption: IEC61000-4-11
Case color Light gray (Munsell 5Y7/1)
Degree of protection IP40 (panel surface)
Weight Approx. 90 g

 

*1. The value is ±5% FS +100 ms to −0 ms max. when the C, D, or G mode signal of the H3CR-AP is OFF.
*2. The influence of voltage of the H3CR-A8E (24 to 48 VAC/12 to 48 VDC) is ±2.0% FS max. with a single-phase power
       supply with fullwave rectification.
*3. Refer to the Life-test Curve (Reference).
*4. Contact output only.

WELCOME TO SIAM-AUTOMATION

Contact
Tel📞 : 086-344-7034
(ฝ่ายขาย)
Line @ : @siam42 (มี@ด้านหน้านะคะ)
Email : siamhitech_world@hotmail.com

-Open Monday-Friday-
เปิดทำการ จันทร์-ศุกร์
(หยุดเสาร์-อาทิตย์ และวันหยุดราชการ)
8.30-5.00pm.

***CASH BILL NOVAT***
บิลเงินสด ไม่มี VAT

วิธีการชำระเงิน

Please ADD LINE For Check & Confirm Order Thank you
" ADD LINE เพื่อ Recheck สินค้า"
***สินค้าบางตัวไม่ได้ update สต็อค***

ทางร้านยังไม่ได้ทำการเพิ่มบัญชีรับเงิน กรุณาติดต่อ เจ้าของร้าน

นโยบายการเปลี่ยนหรือคืนสินค้า

นโยบายการรับเปลี่ยน

1.ร้านยินดีรับเปลี่ยนสินค้า ภายใน 7 วันทำการนับตั้งแต่ลูกค้าเซ็นต์รับสินค้านั้นแล้วหากเกินจากวันเวลาดังกล่าวแล้ว บริษัทฯ ขอสงวนสิทธิ์ในการไม่รับเปลี่ยน/คืนสินค้า

2.ลูกค้าสามารถขอเปลี่ยน/คืนสินค้าโดยลูกค้าจะต้องทำการจัดส่งสินค้ากลับมายังบริษัทฯโดยที่สินค้าที่ลูกค้าต้องการเปลี่ยน/คืนจะต้องอยู่ในสภาพสมบูรณ์ ไม่ชำรุดเสียหายจากการใช้งาน

สภาพสินค้าต้องไม่เกิดการเปลี่ยนแปลงใดๆ รวมถึงป้ายราคา ป้ายยี่ห้อสินค้า เอกสารคู่มือต่างๆยังคงอยู่ และบรรจุ ในหีบห่อบรรจุภัณฑ์ของสินค้านั้นๆ ในสภาพเดียวกันกับสภาพที่บริษัทฯ นำส่งต่อลูกค้าพร้อมแสดงหลักฐานในการสั่งซื้อสินค้า

ซึ่งลูกค้าสามารถเปลี่ยน/คืนสินค้าตามกรณีดังต่อไปนี้

2.1 จัดส่งสินค้าผิดรุ่น ผิดสี หรือผิดขนาด ให้กับลูกค้า อ้างอิงตามหลักฐานใบสั่งซื้อ

2.2 จัดส่งสินค้าที่มีลักษณะแตกต่าง หรือไม่มีส่วนคล้ายคลึงกับรูปภาพของสินค้าที่ได้แสดงไว้ในหน้ารายละเอียดสินค้า

2.3 จัดส่งสินค้าที่มีสภาพชำรุด เสียหาย หรือไม่สามารถใช้งานได้ตั้งแต่ได้รับสินค้า ให้กับลูกค้า ทางร้านจะแจ้งสภาพให้ก่อนตกลงสั่งซื้อ

นี่คือกล่อง "เขียนข้อความ" กล่องที่จะให้คุณเพิ่มข้อความ รูปภาพและวิดีโอได้อย่างอิสระตามสไตล์ของคุณเอง เช่น แบนเนอร์ โปรโมชั่น บทความ แนะนำร้านค้า หรือ รายการสินค้าเด่น เป็นต้น โดยคุณสามารถแก้ไขหรือลบกล่องนี้ได้หากคุณต้องการ ซึ่งมีวิธีการตามขั้นตอนดังต่อไปนี้

วิธีการแก้ไขข้อความในกล่อง

เข้าสู่โหมดตกแต่งร้าน > คลิกเลือกที่กล่องนี้ > เลือกเมนูข้อความ
จากนั้นคุณสามารถแก้ไขข้อความ หรือ ลบกล่องได้ด้วยการคลิกไอคอนถังขยะค่ะ

CATEGORY

MEMBER

STATISTICS

หน้าที่เข้าชม942,629 ครั้ง
ผู้ชมทั้งหมด622,298 ครั้ง
เปิดร้าน17 ม.ค. 2559
ร้านค้าอัพเดท17 ก.ย. 2568
รายการสั่งซื้อของฉัน
เข้าสู่ระบบด้วย
เข้าสู่ระบบ
สมัครสมาชิก

ยังไม่มีบัญชีเทพ สร้างบัญชีใหม่ ไม่มีค่าใช้จ่าย
สมัครสมาชิก (ฟรี)
รายการสั่งซื้อของฉัน
ข้อมูลร้านค้านี้
ร้านสยามออโตเมชั่น
สยามออโตเมชั่น
บริษัท สยามออโตเมชั่น ขายอะไหล่ออโตเมชั่น-อุปกรณ์เครื่องจักรอุตสาหกรรม สินค้าใหม่และมือสอง เบอร์โทรติดต่อฝ่ายขาย TEL : 086-344-7034 ID Line : @siam42 website :http://www.siam-automation.com website :https://siamhitech42.com/ E-mail : siamhitech_world@hotmail.com มั่นใจในสินค้าและบริการ เราดำเนินงานมากว่า 28 ปี ( สินค้ามีจำนวนมากขายทั้งปลีกและส่ง ) ข้อมูลและรายละเอียดสินค้าเด่น บางชนิด : กลุ่มสินค้า PLC ขายPLC ซื้อ PLC ข้อมูลของ PLC Software | PLC พร้อมกล่องคอนโทรล | สาย Link PLC Cylinder Soleniod Valves Fiber optic Sensor , Proximity , Reed Switch , Photo Sensor Servomotor , Stepping Motor LINEAR GUIDE สไลด์ลม สไลด์ลูกปืน XYZ LN Guide ข้อต่อลม Fitting Hand Press HOT PLATE เตาให้ความร้อน (1) SIGNAL TOWER ไฟสัญญานเตือนแบบชั้น PLC พร้อม Software Program PLC พร้อมกล่องคอนโทรลครบชุด Vision System กล้องCCD จับความต่าง Rotary ,Air Clipper กรองลม กรองน้ำมัน เรกกรูเรเตอร์ เกจ / FILTER REGULATOR เกียร์ทดรอบ Worm Gear ไขควงไฟฟ้า คอปเปอร์ / Coupler คอมพิวเตอร์ / Computer คัปปลิ้ง ยอย Coupling BOWL FEEDER เครื่องป้อนสกรูอัตโนมัติ เครื่องFeed Screw เครื่องกำจัดไฟฟ้าสถิต Ionizer เครื่องจักรกล CNC เครื่องเชื่อม SPOT SPOT welding เครื่องล้างอัลตร้าโซนิค Ultrasonic Cleaner เครื่องเลเซอร์ Laser เครื่องมือวัด สอบเทียบ เครื่องหยอดของเหลว Dispenser Machine Counter ,Timer HMI TOUCH SCREEN DISPLAY จอทัชสกรีน จอแสดงผล ชิ้นงาน และเครื่องจักรอุตสาหกรรมมือสองต่างๆ เซฟตี้สวิทช์ Safety Switch เซอร์โวมอเตอร์ ,ไดร์เวอร์ / AC-Servo motor ,Driver โซลิดสเตตรีเลย์ / Solid State Relay โซลินอยด์วาล์ว ,แว๊กซ์คั่ม / Solinoid Valve ดอกสว่าน ตู้อบ ,เตาอบความร้อน / Oven / CHAMBER โต๊ะสแตนเลส ,โต๊ะเหล็ก โต๊ะหินแกรนิต ตู้ไฟ, เหล็ก, ตู้พลาสติก, ตู้สแตนเลส ตู้ไฟเบอร์อ๊อฟติก UV SPOT ถังลมแสตนเลส ,ถังกวน ,ถังปั่น ,ถังสตรีม ถังลม ตัวควบคุมอุณหภูมิ , สายเทอร์โมคัปเปิล / Temperature Controller เทอมินอล /รีโมท เทอมินอล/Terminal/REMOTE TERMINAL นิวเมติก ,cylinder / Air Slide Rodless/ Air Slide Table บอลสกรู ,ลีดสกูล,มอเตอร์พร้อมบอลสกรู / Ball Screw Breaker/Magnetic/Overload เบรค ,ครัทช์ / Brake ,Cruth แบร์ริ่ง ,ลูกปืน / Bearing พัดลม ,โบลเวอร์หอยโข่ง ,ปั้มน้ำ,ริงโบลเวอร์ Proximity Sensor ตรวจจับวัตถุโลหะ Pressure Switch ,Flow Sensor , Flow Switch,Floatless Level Switch (54) Power Supply Foot Valve โฟลมิเตอร์ / Flow Meter โฟโตอิเล็กทริคเซนเซอร์ / Photo Electric Sensor มอเตอร์ ,มอเตอร์เกียร์ ,มอเตอร์DC ,Encoder / Motor รางร้อยสายไฟ ,กระดูกงู /Cable Carrier ,Wire Casing รางอลูมิเนียม, แผ่นอลูมิเนียม, เสา, น๊อต ,มือจับ รีเลย์ / Relay โรบอท ,แขนโรบอท ,IAI Cylinder Limit Switch รีดสวิทช์ / สวิตช์แม่เหล็ก/Reed Switch เลนส์ขยาย ,กล้องจุลทรรศน์ วาล์ว ,บอลวาล์ว / Valve ,Ball Valve Hand Valves แว๊กซ์คั่มปั๊ม ,ปั๊มไฮดรอลิค ,ปั้มลม สายพานลำเลียง / Conveyor สายลม PU CC-LINK สายไฟ (4) Stopper สวิทช์ไฟ ,สวิทช์ลม,ออด Switch, อีเมอร์เจนซี่ สินค้าของใหม่รวมหลายประเภท หม้อแปลงไฟ Transformer หลอดยูวี ไฮโดรเย่น Loadcell อัดชิ้นงานอัตโนมัติ (15) Inverter Area Sensor Heater Hand Valve
เบอร์โทร : 086-344-7034
อีเมล : siamhitech_world@hotmail.com
ส่งข้อความติดต่อร้าน
เกี่ยวกับร้านค้านี้
สินค้าที่ดูล่าสุด
ดูสินค้าทั้งหมดในร้าน
สินค้าที่ดูล่าสุด
บันทึกเป็นร้านโปรด
Join เป็นสมาชิกร้าน
แชร์หน้านี้
แชร์หน้านี้

TOP เลื่อนขึ้นบนสุด
พูดคุย-สอบถาม